My next class:
Network Monitoring and Threat Detection In-DepthSingaporeNov 18th - Nov 23rd 2024

Enabling Privacy Enhanced Addresses for IPv6

Published: 2011-06-01. Last Updated: 2011-06-02 13:26:33 UTC
by Johannes Ullrich (Version: 1)
5 comment(s)

Many operating systems use the EUI-64 algorithm to generate IPv6 addresses. This algorithm derives the last 64 bits of the IPv6 address using the MAC address. Many see this as a privacy problem. The last half of your IP address will never change, and with MAC addresses being somewhat unique, the interface ID becomes close to a unique "cookie" identifying your system.

As a result, RFC3041 introduces "privacy enhanced" addresses which will change and are created by hashing the MAC address. Of course, each operating system has its own way to enable privacy enhanced addresses.

Windows 7:

You can use "netsh" to enable and configure privacy enhanced addresses. Use

netsh interface ipv6 show privacy 

to query the status, and

netsh interface ipv6 set privacy state=enabled 

to enable it. In my testing, privacy enhanced addresses were enabled and I wasn't actually able to disable them (a possible bug?).

OS X:

OS X uses the sysctl command to change various kernel parameters, including privacy enhanced addresses. By default, EUI-64 is used.

To enable, run 

sudo sysctl -w net.inet6.ip6.use_tempaddr=1

and cycle the interfaces (ifconfig en0 down; ifconfig en0 up). However, to have this setting survive a reboot, create a file called /etc/sysctl.conf and add the line:

 

net.inet6.ip6.use_tempaddr=1

 Linux:

as root, similar to OS X, update the respective /proc entries

echo 1 > /proc/sys/net/ipv6/conf/all/use_tempaddr
echo 1 > /proc/sys/net/ipv6/conf/default/use_tempaddr
echo 1 > /proc/sys/net/ipv6/conf/eth0/use_tempaddr

Linux uses an /etc/sysctl.conf file, just like OS X, to make these changes persistent during reboots.

 

------
Johannes B. Ullrich, Ph.D.
SANS Technology Institute
Twitter

5 comment(s)
My next class:
Network Monitoring and Threat Detection In-DepthSingaporeNov 18th - Nov 23rd 2024

Comments

The problem with privacy IPv6 addresses of endpoints on a corporate network, is well, the "privacy".

Sometimes IT admins actually do need to track down physical computers; with privacy addresses, tracking down by IP address will be complicated, since IP address changes all the time.

At least with IPv4, DHCP servers can log which MAC address had such and such IP at such and such time.

With IPv6, some new less-convenient (possibly more failure-prone) monitoring mechanism will need to be devised, to be able to track what MAC address had what privacy address and such and such time, for auditing purposes.



Windows7 correct syntax

netsh interface ipv6 set privacy state=enabled
thanks for correcting the typo. I fixed it in the article above.

Regarding corporate networks: I agree. And this was one reason why at least for Vista, the "Pro" versions had EUI-64 addresses and the "Home" versions used privacy enhanced.

Sadly, I can't get EUI-64 to work for Windows 7. (but still experimenting with it... so maybe later)
Linux looks similar, but not identical to OSX

http://ipv6int.net/systems/linux-ipv6.html#privacy

Unsurprisingly, OSX instructions also work on FreeBSD.

Diary Archives