WMF: Status of Windows 98 and Windows ME ?

Published: 2006-01-07. Last Updated: 2006-01-07 23:06:24 UTC
by Swa Frantzen (Version: 1)
0 comment(s)
We continue to receive questions from Windows 98 and Windows ME users concerning WMF.  To simplify reading (and writing) this diary, I will refer to these two versions of Windows as win9x.

Is there risk?

Win9x has the flawed gdi32.dll library. In the initial advisory, which is no longer online, Microsoft listed that win9x in the company of all of the other vulnerable operating systems.

However, win9x is slightly different from the more recent Windows versions in the way it works. These differences are enough to prevent the current and publicly known exploits from working.  It does seem that Microsoft is confident that these differences are substantial enough to keep win9x tailored WMF exploits from becoming available.

So to answer the question above, yes there is a risk. Win9x is most likely vulnerable but there is no clear and present threat (yet!).

Patch please?

We have been asked for a win9x patch or other foolproof solution for these systems. Unfortunately:
  • Microsoft has not released an official patch so far and there is none on the horizon either.
  • The Microsoft workaround (unregistering shimgvm.dll to prevent access to the vulnerable code in gdi32.dll) for other windows versions cannot be performed in win9x.  The shimgvm.dll library file does not exist in win9x.
  • The unofficial patch which we endorsed in a very specific situation does not work on win9x. These older versions lack technology needed for the patch to protect in memory libraries from being accessed.
  • We know that several software coders have or are going to publish patches for Win9x systems.  However, we highly recommend that you make a risk decision based on your own situation as to whether you wait for a Microsoft patch.  We did the extra-ordinary thing of recommending an unofficial patch earlier for a very specific condition. The conditions for the win9x
    situation are simply not the same now. There is no clear and present threat and the defenses in the form of anti-virus programs have become significantly stronger.

What options that are left?

If you find a no-user-interaction-required exploit of WFM files against win9x, send it to Microsoft (or alternatively send it to us, we will disclose it responsibly to Microsoft).  This would be the last necessary requirement for Microsoft to build and release an official patch for win9x.

It may take a while for this "critical" exploit to surface and some of you want a solution now.  You are left with:
  • Accept the risk and play the wait and see game.
    • Possibly, try to mitigate the risk by getting a good anti-virus program in place, preferably one that is known to trigger on the exploits without triggering on the payload in the WMF. Make sure the signatures are always up to date.
    • Possibly, try to mitigate the risk by isolating the system. Isolating can be done on networks by air-gapping the machines, by removing floppy and cd-rom drives, by disabling USB ports, etc... Some systems might benefit enough from this to remain usable for a while longer.
  • Balance the risks of one of the unofficial patches.
    • I cannot recommend this action at this time, but it is an option you can evaluate, if you find it reduces your overall risk you might have a mitigation strategy.
  • Mitigate the risk by changing the OS
    • You might need to upgrade the hardware in order to be able to upgrade to a more recent version of windows. (Remember: if you pass down the old hardware to your family, friends or a good cause, they now have the problem you had)
    • The hardware capable of running win9x is mostly capable of running alternative operating systems such as Linux, OpenBSD, FreeBSD, and others.  So you have many choices from witch to pick.
You could try to find a combination of the above that fits your specific situation or company policies.

We'd like to give you better alternatives, but currently we see none.

--
Swa Frantzen
Keywords:
0 comment(s)

WMF FAQ

Published: 2006-01-07. Last Updated: 2006-01-07 17:16:23 UTC
by Swa Frantzen (Version: 5)
0 comment(s)
This version has been updated to reflect the release of the official patch by Microsoft. Take care with the translations as they might very well not be up to date.

[a few users offered translations of this FAQ into various languages. Obviously, we can not check the translation for accuracy, nor can we update them. Most of these translations are hosted on servers operated by the translation authors. So use at your own risk: Deutsch and Deutsch (pdf), Catalan , Español , Italiana and Italiana, Polski, Suomenkielinen, DanishJapanese, Slovenian, Chinese, Norwegian and Nederlands ]

To assist with internal presentations about this issue, we made a slide set available:
PDF, Power Point , OpenOffice 2.0
  • Why is this issue so important?
The WMF vulnerability uses images (WMF images) to execute arbitrary code. It will execute just by viewing the image. In most cases, you don't have click anything. Even images stored on your system may cause the exploit to be triggered if it is indexed by some indexing software. Viewing a directory in Explorer with 'Icon size' images will cause the exploit to be triggered as well. Microsoft initially announced that an official patch would not be available before January 10th 2006 (next regular update cycle). But they did release a patch out of cycle earlier.
  • Is it better to use Firefox or Internet Explorer?
Internet Explorer will view the image and trigger the exploit without warning. New versions of Firefox will prompt you before opening the image. However, in most environments this offers little protection given that these are images and are thus considered 'safe'.
  • What versions of Windows are affected?
Windows XP, (SP1 and SP2), Windows 2003 are affected by the currently circulating exploits.  Other versions may be affected to some extent. Mac OS-X, Unix or BSD is not affected.

Note: If you're still running on Win98/ME, this is a watershed moment: we believe (untested) that your system is vulnerable and there will be no patch from MS.  Your mitigation options are very limited. You really need to upgrade.
  • What can I do to protect myself? 
We did, due to the expectional conditions, endorse an unofficial patch for a while, but are now recommending you install the official Microsoft supported patch ASAP.

The unofficial patch was made available by Ilfak Guilfanov. Our own Tom Liston reviewed the patch and we tested it. The reviewed and tested version is not available form us any longer (last version was 1.4, MD5: 15f0a36ea33f39c1bcf5a98e51d4f4f6), PGP signature (signed with ISC key) here. THANKS to Ilfak Guilfanov for providing the patch!!
We also advised the suggested mitigation action by Microsoft to unregister another DLL, due to the availability of an official patch there is no more need for that.
  • How do I re-register the DLL and remove the patch?
Important: You need to REBOOT the system before re-enabling the DLL. Malicious WMF images may still be sitting in memory waiting to be displayed. Our testing has shown, that they will be executed as soon as the DLL is re-enabled.

To re-register the DLL, click State, click Run, type
    regsvr32 %windir%\system32\shimgvw.dll
This is the same command as you used to unregister, with the -u part).

To remove the patch, open the control pannel, open the "Add/Remove Programs" icon, find the patch in the list and uninstall.

To uninstall the patch from the command line (vs. using the Control Panel), enter this command:
msiexec.exe /X{E1CDC5B0-7AFB-11DA-8CD6-0800200C9A66} /qn

  • How does the unofficial patch work?
The wmfhotfix.dll is injected into any process loading user32.dll.  The DLL then patches (in memory) gdi32.dll's Escape() function so that it ignores any call using the SETABORTPROC (ie. 0x09) parameter.  This should allow Windows programs to display WMF files normally while still blocking the exploit.  The version of the patch we distributed was carefully checked against the source code provided as well as tested against all known versions of the exploit.  It would work on WinXP (SP1 and SP2) and Win2K. The documentation provided by Microsoft show the official patch does remove exactly the same functionality from gdi32.dll than the unofficial patch prevent from begin used.
  • Are there other patches?
ESET, the maker of the antivirus product NOD32, published another patch.  We haven't gotten around to check it as thoroughly as Ilfan's patch and the official patch release pre-empted possible efforts to do much with it. The ESET patch claimed to work for older versions of Windows (e.g. ME). The ESET patch does not require a reboot. Please refer to the ESET site for any additional questions. Microsoft's official (preliminary) patch was leaked and posted to some web sites. Microsoft recommends against installing that version.
  • Is there a test to see if I am vulnerable?
We created an image that will start the windows calculator. See http:// sipr.net / test.wmf. This image should be detected by all up to date antivirus scanners and uses an easy to detect version of the exploit. Your antivirus scanner should detect this image. However, it detecting the image is not sufficient to prove that it will detect other versions of the exploit.
  • Would unregistering the DLL (without using the official or unofficial patch) protect me?
It might help. But it is not foolproof. We want to be very clear on this: we have some very stong indications that simply unregistering the shimgvw.dll isn't always successful. The .dll can be re-registered by malicious processes or other installations, and there may be issues where re-registering the .dll on a running system that has had an exploit run against it allowing the exploit to succeed.  In addition it might be possible for there to be other avenues of attack against the Escape() function in gdi32.dll.  We strong recommend to install the official patch. 
  • Should I just delete the DLL?
It might not be a bad idea, but Windows File Protection will probably replace it. You'll need to turn off Windows File Protection first. Also, once an official patch is available you'll need to replace the DLL. (renaming, rather than deleting is probably better so it will still be handy).
  • Should I just block all .WMF images?
This may help, but it is not sufficient. WMF files are recognized by a special header and the extension is not needed. The files could arrive using any extension, or embeded in Word or other documents.
  • What is DEP (Data Execution Protection) and how does it help me?
With Windows XP SP2, Microsoft introduced DEP. It protects against a wide range of exploits, by preventing the execution of 'data segements'. However, to work well, it requires hardware support. Some CPUs, like AMD's 64 Bit CPUs, will provide full DEP protection and will prevent the exploit. You can learn more about DEP, how to enable it and check that it is running, here.
  • How good are Anti Virus products to prevent the exploit?
At this point, we are aware of versions of the exploit that will not be detected by all the antivirus engines. We hope they will catch up soon. But it will be a hard battle to catch all versions of the exploit. Up to date AV systems are necessary but likely not sufficient.
  • How could a malicious WMF file enter my system?
There are too many methods to mention them all. E-mail attachments, web sites, instant messaging are probably the most likely sources. Don't forget P2P file sharing and other sources.
  • Is it sufficient to tell my users not to visit untrusted web sites?
No. It helps, but its likely not sufficient. We had at least one widely trusted web site (knoppix-std.org) which was compromissed. As part of the compromise, a frame was added to the site redirecting users to a corrupt WMF file. "Tursted" sites have been used like this in the past.
  • What is the actual problem with WMF images here?
WMF images are a bit different then most other images. Instead of just containing simple 'this pixel has that color' information, WMF images can call external procedures. One of these procedure calls can be used to execute the code.
  • Should I use something like "dropmyrights" to lower the impact of an exploit.
By all means yes. Also, do not run as an administrator level users for every day work. However, this will only limit the impact of the exploit, and not prevent it. Also: Web browsing is only one way to trigger the exploit. If the image is left behind on your system, and later viewed by an administrator, you may get 'hit'.
  • Are my servers vulnerable?
Maybe... do you allow the uploading of images? email? Are these images indexed? Do you sometimes use a web browser on the server? In short: If someone can get a image to your server, and if the vulnerable DLL may look at it, your server may very well be vulnerable.
  • What can I do at my perimeter / firewall to protect my network?
Not much. A proxy server that strips all images from web sites? Probably wont  go over well with your users. At least block .WMF images (see above about extensions...). If your proxy has some kind of virus checker, it may catch it. Same for mail servers. The less you allow your users to initiate outbound connections, the better. Close monitoring of user workstations may provide a hint if a work station is infected.
  • Can I use an IDS to detect the exploit?
Most IDS vendors are working on signatures. Contact your vendor for details. Bleedingsnort.org is providing some continuosly improving signatures for snort users. Recent releases of this exploit take advantage of http compression and randomization of the exploit to evade IDS signatures.
  • If I get hit by the exploit, what can I do?
Not much :-(. It very much depends on the exact exploit you are hit with. Most of them will download additional components. It can be very hard, or even impossible, to find all the pieces. Microsoft offers free support for issues like that at 866-727-2389 (866 PC SAFETY).
  • Does Microsoft have information available?
There was information on the workarounds and impact available from Microsoft at
http://www.microsoft.com/technet/security/advisory/912840.mspx
but Microsoft in the mean time has release an official patch
http://www.microsoft.com/technet/security/bulletin/ms06-001.mspx
  • What does CERT have to say?
Keywords:
0 comment(s)

Comments


Diary Archives